F4 1S 12A AIO Brushless FC V3, the FIRST flight controller designed specifically for HD VTX. This powerful controller features an STM32F405/AT32F435 chip for high-performance calculations and a 5V 3A BEC solution for the HD VTX. It weighs only 4.2 grams and includes a Serial ELRS 2.4G receiver, 16MB Black Box, Barometer, and Current meter. Designed for HD VTX, it removes the OSD chip AT7456E and also added support for external GPS through Betaflight 4.4.0.

Bullet Point

• F4 1S 12A AIO Brushless FC V3is specially designed for HD VTX, the MCU with stronger performance and computing power, and the new BEC solution with 5V 3A output supportsHD VTX power supply.
• Integrate Serial ELRS 2.4G receiver, 16M black box, barometer, current meter, reserve 2 complete serial ports, and 1 standard SBUS.It is compatible with various devices such as GPS, HD VTX, and external receivers, whichreduces the overall weight and complexity of the build.
• Withalighter weight of4.2g, it improves flight performance and agility.
• There are 2 main control MCUs available: the STM32F405 and the AT32F435. The AT32F435 has a stronger performance, with a COREMARK score that is even comparable to that of the STM32F722.

Specification ofFC

• Six-Axis: ICM42688P(SPIconnection)
• MCU: STM32F405RGT6 (168MHz) / AT32F435RGT7 (288MHz)
• Firmwareversion: Betaflight_4.4.1_BETAFPVF405 (STM32F405)/ ATBetaflight_4.3.2_BETAFPVF435_RC3 (AT32F435)
• Receiver: SerialELRS2.4GReceiver
• Receiver firmwareversion: BETAFPVAIO2400RXELRSV2.5.2
• Antenna: Enameledwire
• Blackbox Memory: 16MB
• Sensor:Barometer (BMP280),Voltage&Current
• MountingHoleSize:26mmx26mm (suitableforwhooppatternmountinghole)
• BEC*: 5V2A@4Vsupply, 5V3A@8Vsupply
• USBPort:SH1.04-Pin
• Built-inESCwith12Acontinuousandpeak25Acurrent
• ESCinputvoltage:1-2S
• ESCfirmware:C_X_70_48_V0.19.2.hexforBB51Bluejayhardware
• Signalsupport: D-shot300, D-shot600
• Weight:4.23g (without motor connectors) / 4.68g(with motor connectors), excluding power cable

*TheoutputcurrentofBECwilldecreaseasthetemperatureincreases

Diagram for F4 1S 12A AIO FCV3

Comparison

The F4 1S 12A V3 FC is specifically designed for HD VTX and features an upgraded STM32F405/AT32F435 chip for high-performance calculations. It also includes a Serial ELRS 2.4G receiver for increased range and reliability, as well as a 16MB Black Box for easy flight data recording and analysis. These upgrades aim to enhance the overall flying experience for pilots.

About ATBetaflight

ATBetaflight is a fork ported to Artery Tek AT32F435/7 based on betaflight 4.3. The biggest difference from the Betaflight firmware is that the sensitivity of the BMI270 gyroscope is optimized, and the measured sensitivity error is reduced from about 2% to less than 0.04%, which is consistent with the specification table in the datasheet. Phenomena such as “horizon drift” and “wrong direction of GPS rescue” basically no longer appear in the actual flight.

The current release of ATBetaflight 4.3.2 RC3 already supports all hardware functions but does not support the new functions or optimization problems of subsequent versions of Betaflight 4.3.1. For more information, please refer to:https://github.com/flightng/atbetaflight

BetaflightFirmware and CLI

ForSTM32F405Version

FCfirmware:Betaflight_4.4.1_BETAFVF405

Referencelink:

https://github.com/betaflight/betaflight/releases/tag/4.4.1

For AT32F435Version

FCfirmware: ATBetaflight_4.3.2_BETAFPVF435_RC3

Referencelink:

https://github.com/flightng/atbetaflight/releases/tag/v4.3.2-rc3

Pay attention, DO NOT flash the other firmware for AT32F435 version. Betaflight official firmware for the AT32F435 is still in the development process, only the currently released ATBetaflight 4.3.2 RC3 has bidirectional Dshot, PRM, and RGB functions.

Ifyouneedtouse the Betaflightconfigurator,pleaseuse Betaflight_10.10.0and follow the steps belowto open the “Show all serial devices” in the “Options” first to recognize the port.

Download the firmware and CLI dump file.

ESC Firmware

With BB51 ESC solution, F4 1S 12A FC V3 is based on BLHeliSuite16714903 with Bluejay ESC firmware, it supports bidirectional D-shot and RPM filtering in Betaflight, offers 24KHz, 48KHz, and 96KHz fixed PWM frequency for options, and custom start-up melodies.F4 1S 12A FC V3 default factory setting is 48KHz and it doesnt recommend upgrading the 96KHz, or it might cause an error in the motor idle setting, not spinning when disarmed.

DO NOT flash the firmware with a shorter interval, otherwise, there will be a certain chance of stalling and burning the flight controller.

• ESC-Configurator:https://preview.esc-configurator.com/
• Download BLHeliSuite16714903
• Download the Bluejay ESC firmware. Please choose C_X_70.HEX

Serial ELRS 2.4G RX

SerialELRS 2.4G RX uses the Crossfire serial protocol (CRSF protocol) to communicate between the receiver and the flight controller board. So the Serial ELRS 2.4G RX is available to support upgrading to ELRS V3 with no need to flash Betaflight flight controller firmware.

• Enter binding status by power on/off three times.
• Plugin and unplugthe flight controller three times;
• Make sure the RX LED is doing a quick double blink, which indicates the receiver is in bind mode;
• Make sure the RF TX module or radio transmitter enters binding status, which sends out a binding pulse;
• If the receiver has a solid light, it’s bound.

The Serial ELRS 2.4G RX can be updated via Wi-Fi or Betaflight serial passthrough. Here is the way to update the Serial ELRS 2.4G RX firmware through passthrough.

• PluginyourFCtoyourcomputer,butdoNOTconnecttobetaflightconfigurator.
• Choosetarget” 2.4GHz AIO RX”.
• FlashusingtheBetaflightPassthroughoptioninExpressLRSConfigurator.

How to flash firmware via Wi-Fi here.

Connecting External RX/HD Digital

Both STM32F405 andAT32F435 version support external HD digital VTX. Please note that the board reserves two serial ports and a standard SBUS port, which is available for the external CRSF protocol receiver or GPS module, and SBUS protocol receiver. You can refer to the below picture.

Recommend Parts

If you want to try the popular ExpressLRS receiver version for long-range performance, highly recommend you check the items forthe ExpressLRS series.

• Drones:Meteor75 HD, Meteor75 Pro HD, Pavo Pico Brushless Whoop Quadcopter, 85mm whoop frame likeMeteor85 HD, 3″ toothpick drones
• Battery:BT2.0 450mAh 1S 30C Battery, 450mAh 2S 45C Battery
• Motor: 1102 18000KV motor, 1103 11000KV motor
• Propeller: HQ3020 2-blade Props,2020 4-bladeProps

Package

• 1 * F4 1S 12A AIO FCV3
• 4 * M2*10 machine screw
• 4 * M2*10 nylon screw
• 4 * M2 nuts
• 4 * shock absorbing ball
• 4 * JST1.25mm angle socket
• 4 * JST1.25mm straight socket
• 1 * SH1.0 4Pin adapter cable
• 1 * Type-C to SH1.0 adapter
• 1 * XT30 power cord
• 1 * filter capacitor