Thermal Fuse 141C VET8139 by Semiconductors

Reliable Thermal Protection for Everyday Appliances

Looking for a thermal fuse for your home appliances or electronics? The VET8139 thermal fuse from Semiconductors is a dependable solution for protecting your devices from overheating. Also known as a thermal cutoff or thermal cut-off fuse, this small, non-resettable device is designed for safety and easy replacement.

Where to Use the 141C Thermal Fuse

The VET8139 thermal fuse is suited for thousands of thermal fuse replacement scenarios, including:

• Hair Dryers
• Refrigerators
• Battery Chargers
• Irons & Hot Plates
• Coffee Makers & Toasters
• Microwave Ovens & Dishwashers
• Glue Guns, Electric Motors & Window Fans
• Uninterruptible Power Supplies (UPS)
• And hundreds of other small appliances and electronics

How the VET8139 Thermal Cutoff Works

When the environmental or operating temperature surpasses 141C (286F), the internal pellet inside the fuse melts. This action triggers the spring contacts to permanently open, cutting off power and helping to prevent dangerous overheating.

Key Features and Technical Specs

• Functioning (Opening) Temperature: 141C (286F)
• Holding Temperature: 117C (243F)
• Maximum Temperature: 171C (340F)
• Maximum Current Rating: 15 Amps
• Leads: 18 gauge solid copper, 1-1/3″ length
• Rating: 120/250VAC: 15A/10A, 240VAC: 25A/16.7A, 277VAC: 20A/15A, Pilot Duty 120277VAC: 125VA, Motor Rating: 180VAC 3A
• UL, CSA, VDE Certified: Yes UL File No. E49429, E117626; CSA LR43279; VDE 115369
• Complies with international safety standards

Why Choose Semiconductors Thermal Fuses?

Formerly branded as NTE8139, Semiconductors has sourced the original manufacturer for these thermal fuses after NTE discontinued business. TheVET8139 thermal fuse offers the same specifications and dependable performance for a wide variety of applications in home appliances and small electronics.

Easy Installation and Safe Replacement

This thermal fuse is simple to install, thanks to full-length solid copper leads. It does not reset automatically, ensuring fail-safe protection. Always install in accordance with manufacturer guidelines for best results and safety.

Technical Notes:

• Temperature sensitivedo not store above +48C (+120F)
• Color banding does not indicate temperature group
• Fuse resistance equals that of an 18 gauge copper wire segment
• Continuous operation should be at least 30C below the fuses maximum opening temperature

NOTICE 1: As you may or may not already know. NTE is officially out of business and we are unable to order parts from them ever again.

However, we were able to locate the company that NTE used to make these Thermal Cutoffs (All NTE did was relabel product and resell it). This means that you may order the NTE part, but we may ship different part numbers that are the original parts that match the NTE specifications. Certificates Of Conformity are available from us, upon request.

NOTICE 2: These no longer come with the un-insulated crimp butt connectors that NTE used to include with them. If you need them, we recommend either ordering SR-BUT-2N. If you have a special need for them, you can always email us for more information and we are always here to help.